How to get admission in IIT Bhubaneswar?

To get into IIT Bhubaneswar, you generally need to clear JEE Advanced for B.Tech, JEE Main for other UG programs (like Int. M.Tech), JAM for M.Sc., and GATE for M.Tech/Ph.D., meeting specific academic eligibility (like 10+2 PCM for B.Tech, 60%+ in B.E./B.Tech for M.Tech) and category cutoffs, then participate in JoSAA counselling for UG/Int. M.Tech. Admission pathways vary by program (B.Tech, M.Tech, M.Sc., Ph.D.), with JEE being the primary route for undergraduate engineering, so always check the official IIT Bhubaneswar website for precise, updated criteria.

Can I join IIT Bhubaneswar without GATE?

Yes, you can get admission to M.Tech programs in some IITs without a GATE score through routes like sponsored seats (for working professionals), direct admission for exceptional B.Tech graduates (especially from IITs with high CGPA), or by clearing the institute's own written tests/interviews for self-financed seats, though options vary by IIT and department, with IIT Madras, Delhi, Hyderabad, and others offering pathways.

Can I get into IIT Bhubaneswar without JEE?

Yes, you can get into an IIT without JEE for many postgraduate and some undergraduate courses, but not for the traditional B.Tech/B.E. programs, which always require JEE Advanced; alternatives include exams like GATE (M.Tech), JAM (M.Sc.), CAT (MBA), UCEED/CEED (Design), and HSEE (Humanities), plus special Olympiad routes for B.Tech at some IITs (like IIT Madras's ScOpE).

How much rank is required for IIT Bhubaneswar?

For IIT Bhubaneswar, JEE Advanced ranks vary by branch, but generally, a General category rank under 3000 is great for CSE, while other branches like Civil or Chemical Engineering might close around 6000-7000 in JoSAA Round 1 (2024 data), with SC/ST/EWS categories seeing significantly lower, better ranks for admission. Expect competitive ranks for top branches and slightly higher for others, always checking JoSAA counseling for specific branch cutoffs.

What is the closing rank for IIIT Bhubaneswar CSE?

For IIIT Bhubaneswar's CSE program (JEE Main), expect closing ranks in the ballpark of 31,000-32,000 (General Category), with slight variations yearly; in 2024, it closed around 31,439, but ranks vary by round and category, with Home State Quota typically having higher ranks.

IIT Bhubaneswar Admission Process

IIT‍‌‍‍‌‍‌‍‍‌ Bhubaneswar offers degrees in Bachelors, Masters and research with admissions through national-level entrance examinations and interviews while some program admissions depend on other factors. In B.Tech. and Dual Degree courses, the candidates should be qualified in JEE Main and JEE Advanced. They must also satisfy the academic and age criteria for eligibility. The registrations and the dates for the exam will be from the end of 2025 to the beginning of 2026.

Indian Institute of Technology Bhubaneswar take admission in the M.Tech course through GATE score or IIT graduate status with an acceptable CGPA are the necessities. All the candidates are obliged to register at COAP and submit their applications online, whether seeking admission through the entrance test (GATE) or applying under the direct admission category. They are shortlisted based on GATE scores, along with written tests and interviews for the sponsored category. IIT Bhubaneswar M.Sc. course admissions will be done through JAM scores. This course is under the Joint M.Sc- Ph.D programme. And the admission will be done in the autumn session. In some cases the admission will be done according to the MHRD regulations, through this candidate can either transfer or offer admission to this course. After that, counselling will be done in four rounds in which candidates need to have three options for each round: accept and freeze, accept and upgrade and reject and quit. Admission to joint M.Sc. and Ph.D. programmes is also offered through the IIT JAM.

Those wishing to study a PhD or MS by Research must possess relevant academic qualifications and have qualifying exams such as GATE, CSIR-UGC NET, JAM, or JEST, with some relaxations and provisions for sponsored candidates. In phases of admissions, the process is secured on merit, equal rights and transparency for all the ‍‌‍‍‌‍‌‍‍‌courses.

Screening Criteria	Quick Assessment
Total Experience	2.5 years
Core Content Background	UPSC academic content
Type of Content Created	Magazines, sample papers, exam preparation material
SEO Content Experience	Not demonstrated
Keyword Research Knowledge	Not aligned with SEO/content marketing needs
Digital Content Exposure	Limited / Not relevant
Content Marketing Fit	Low
Transferability of Skills	Limited, due to academic-focused content
Overall Suitability	Does not meet SEO/content marketing requirements
Screening Outcome	Rejected at screening stage

IIT Bhubaneshwar B.Tech and Dual Degree Entrance Exams Accepted

To‍‌‍‍‌‍‌‍‍‌ get admission at IIT Bhubaneswar in the B.Tech and Dual Degree courses, candidates have to clear both the JEE Main and JEE Advanced exams. JEE Main registration is typically conducted in October-November and again in January, with the exam being held in January and April, and the results announced shortly thereafter. Candidates should have passed Class 12 with Physics, Chemistry, and Mathematics, and should have scored at least 75% aggregate (65% for SC/ST/PwD) or be in the top 20 percentile. A person belonging to the general category must have been born on or after October 1, 2001. In contrast, SC, ST, and PwD candidates are eligible for a five-year relaxation each. Admission is done based on the JEE ‍‌‍‍‌‍‌‍‍‌rank. IIT Bhubaneswar fees are affordable for the UG courses with multiple scholarships based on merit.

Entrance Exam

Important Date

JEE Main + Advanced

Session 1

Registration Date- 31 Oct. to 27 Nov. 2025

Exam Date- 21-30 Jan 2026

Result Date- by 12 Feb 2026

Session 2

Registration Date- Last week of Jan. 2026

Exam Date- 2-9 April 2026

Result Date- by 20 April 2026

IIT Bhubaneswar B.Tech and Dual Degree Admission Process

Step 1: JEE‍‌‍‍‌‍‌‍‍‌ Exam

Registration for the JEE Mains test should be made by the candidate through the official NTA portal. Meet the qualifying standards as per the eligibility criteria.
Candidates need to appear for both JEE Mains and JEE Advanced (after re-registering for JEE Advanced, this is only qualified candidates).

Step 2: IIT Bhubaneswar Counselling

After getting a good rank in JEE Advanced, go to the official website of JoSAA counselling and register for the counselling session.
Besides filling in the preferences of the IIT Bhubaneswar, insert the names of other good institutes, too, where you'd like to study.
Complete your choice filling with a signature, or at least with a Button click.

Step 3: Seat Allotment

Seat allotments will be conducted based on the JEE Advanced ranks and the candidates' preferences.
Then check if it has been allotted via the JoSAA portal/email and accept it.

Step 4: Payment of Seat Booking Fee

Make the payment for the seat that has been accepted: INR 10,000 for General/OBC/NCL/EWS and INR 5,000 for SC/ST/PwD.
The payment should be made online and within the stipulated time period.

Step 5: Reporting and Document Verification

Please ensure you arrive on time at the IIT Bhubaneswar campus.
Please have the original documents for verification, including the JEE Admit Card, Seat Allotment Letter, category certificates, identity proof, etc.

Step 6: Final Confirmation and Registration

At the time of confirmation, the candidate completes all the remaining formalities such as fee payment, document verification, and registration. If organised, join the orientation program.

Step 7: Classes Begin

Classes begin following the academic calendar, which is usually the first week of ‍‌‍‍‌‍‌‍‍‌August.

IIT Bhubaneswar B.Tech Seat Matrix

There is a certain number of seats fixed for each stream, with the likes of Civil and Mechanical Engineering having the most significant number of intakes. The campus is full of life and has an excellent academic environment where students learn from the faculty members who are experienced and also participate in various co-curricular activities, which enable them to acquire technical skills as well as general skills for the ‍‌‍‍‌‍‌‍‍‌future.

Sl. No.	Programmes Offered (B.Tech-4 year)	Student Strength
1	B. Tech in Civil Engineering (CE)	105
2	B. Tech in Computer Science & Engineering (CSE)	82
3	B. Tech in Electrical Engineering (EE)	75
4	B. Tech in Electronics & Communication Engineering (ECE)	54
5	B. Tech in Engineering Physics (EP)	20
6	B. Tech in Mechanical Engineering (ME)	105
7	B. Tech in Metallurgical and Materials Engineering (MME)	35
8	B. Tech in Mathematics and Computing (MC)	20

IIT Bhubaneshwar B.Tech and Dual Degree Eligibility Criteria

To gain an undergraduate degree from IIT Bhubaneshwar, candidates need to fulfil the required eligibility criteria according to the course and categories. Having a valid class 12 or equivalent is mandatory for all courses. B.Tech admission is based on the JEE Advanced score for recent years. Also, candidates need to satisfy the age limits, subject requirements and category-specific criteria, while some categories get relaxations in marks and cutoffs. Overall, it can be said that admission into the B.Tech and dual degree programmes of IIT Bhubaneswar is based on academic excellence in 10+2, rank in JEE Advanced, and the set regulations by the institute and national authorities.

Eligibility Criteria	B.Tech	Dual Degree
Academic Requirements	Applicants must pass Class XII (or equivalent) with at least five subjects and 75% aggregate marks (65% for SC/ST/PwD candidates).	Candidates must clear Class 12 (or equivalent) with Physics, Chemistry, and Mathematics. Minimum aggregate: 75% for General/EWS/OBC (65% for SC/ST/PwD).
Age Criteria	Candidates must be born on or after October 1, 2001 (relaxed to October 1, 1996 for SC/ST/PwD).	Born on or after October 1, 2000 (relaxation applies for SC/ST/PwD).
Admission Process	Solely determined by JEE advanced rank for all B.Tech programs.	Strictly based on JEE Advanced rank via JoSAA counselling.

IIT Bhubaneswar B.Tech and Dual Degree Cutoff 2025

JEE‍‌‍‍‌‍‌‍‍‌ Advanced cutoff ranks of IIT Bhubaneswar for the year 2025 is dependent on different programs, categories, and genders. The starting rank for the vibrant Computer Science and Engineering (CSE) branch is at 2344, whereas the ending rank goes up to 3785 for a candidate belonging to a general category. A civil engineering closing rank varies from around 10063 to 13957 for general candidates, and for females only, the ranks are higher, and they are between 19820 and 22403.

Moreover, the closing ranks of Electrical Engineering, Electronics & Communication, Mechanical Engineering, and Metallurgical Engineering move mostly between 5000 and 15000 for the general category candidates whose ranks vary. OBC, SC, and ST are a few of the reserved categories, having different opening and closing ranks that are a bit higher, thus depicting the category-wise cutoffs that are relaxed. This range of cutoffs at IIT Bhubaneswar showcases a highly competitive yet varied admission landscape across different disciplines and ‍‌‍‍‌‍‌‍‍‌categories.

Civil Engineering (4 Years, B.Tech)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	10063	13957
OPEN	Female-only	19820	22403
EWS	Gender-Neutral	1912	2069
EWS	Female-only	3450	3646
OBC-NCL	Gender-Neutral	4402	4996
OBC-NCL	Female-only	8189	8599
SC	Gender-Neutral	2203	2659
SC	Female-only	2833	3619
ST	Gender-Neutral	883	1093
ST	Female-only	1402	1419

Computer Science and Engineering (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	2344	3785
OPEN	Female-only	4082	6467
OPEN (PwD)	Female-only	50P	50P
EWS	Gender-Neutral	426	525
EWS	Female-only	923	1035
OBC-NCL	Gender-Neutral	984	1415
OBC-NCL	Female-only	2515	2988
OBC-NCL (PwD)	Gender-Neutral	54	54
SC	Gender-Neutral	344	741
SC	Female-only	836	1158
ST	Gender-Neutral	136	257
ST	Female-only	663	663

Electrical Engineering (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	5585	7242
OPEN	Female-only	10538	14511
EWS	Gender-Neutral	886	1041
EWS	Female-only	2136	2167
OBC-NCL	Gender-Neutral	2076	3151
OBC-NCL	Female-only	5062	5470
SC	Gender-Neutral	1101	1766
SC	Female-only	2175	2175
ST	Gender-Neutral	552	862
ST	Female-only	846	846

Electronics and Communication Engineering (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	3873	5535
OPEN	Female-only	8804	9686
OPEN (PwD)	Gender-Neutral	164	164
EWS	Gender-Neutral	671	767
EWS	Female-only	1367	1367
OBC-NCL	Gender-Neutral	1422	2072
OBC-NCL	Female-only	3635	4551
OBC-NCL (PwD)	Female-only	69P	69P
SC	Gender-Neutral	987	1293
SC	Female-only	1476	1476
ST	Gender-Neutral	511	553
ST	Female-only	830	830

Engineering Physics (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	8840	10494
OPEN	Female-only	19737	20216
EWS	Gender-Neutral	1749	1801
OBC-NCL	Gender-Neutral	3444	4500
OBC-NCL	Female-only	6849	6849
SC	Gender-Neutral	1650	2568
SC	Female-only	3531	3531
ST	Gender-Neutral	1221	1221

Mathematics and Computing (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	4174	4607
OPEN	Female-only	7679	8287
EWS	Gender-Neutral	661	727
OBC-NCL	Gender-Neutral	1664	1935
OBC-NCL	Female-only	4715	4715
SC	Gender-Neutral	989	992
SC	Female-only	2114	2114
ST	Gender-Neutral	619	769

Mechanical Engineering (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	4945	10078
OPEN	Female-only	13775	18906
OPEN (PwD)	Gender-Neutral	154P	165P
EWS	Gender-Neutral	1272	1573
EWS	Female-only	2712	2851
OBC-NCL	Gender-Neutral	3085	3975
OBC-NCL	Female-only	6760	7321
SC	Gender-Neutral	1789	2275
SC	Female-only	3073	3225
ST	Gender-Neutral	915	1035
ST	Female-only	1254	1471

Metallurgical and Materials Engineering (4 Years)

Seat Type	Gender	Opening Rank	Closing Rank
OPEN	Gender-Neutral	11591	13695
OPEN	Female-only	20044	21967
EWS	Gender-Neutral	2057	2211
OBC-NCL	Gender-Neutral	5004	5323
OBC-NCL	Female-only	8517	8849
SC	Gender-Neutral	2723	2907
SC	Female-only	3707	3707
ST	Gender-Neutral	1195	1200
ST	Female-only	1764	1764

IIT Bhubaneswar ITEP Programs Admissions Process

Step 1: Eligibility‍‌‍‍‌‍‌‍‍‌ and Entrance Exam

Admission will be granted to those who have good scores in the National Common Entrance Test (NCET) organised by the National Testing Agency (NTA).
Besides that, the candidate must also fulfil the minimum eligibility criteria as per the institute's norms.

Step 2: Application Registration

Go to the institute website for the online application submission. Signing up NCET Roll Number, Email ID, and Date of Birth will be necessary.

Step 3: Application Form Submission

Complete the online application form and submit it. Pay the obligatory application fee of INR 500. Each candidate is allowed to submit only one application.

Step 4: Documents to Upload

Valid ID Proof, 10th and 12th Standard Certificate, NCET Marks Card, Photograph, Signature, and if you belong to a reserved category, please provide the Category Certificate issued in the authorised format.

Step 5: Choice of Disciplinary Major

Candidates are allowed to choose a maximum of 4 disciplinary major preferences based on their qualifications.
After submitting the form, it will not be possible to change your preferences.

Step 6: Seat Allocation and Offer

IIT Bhubaneswar decides the allocation of the seats based on the candidate's NCET marks, choices, and category reservations.
After admission, notification is done through the candidate portal.

Step 7: Seat Booking Fee Payment

The seats will be booked through the official website and candidates need to pay a fixed amount as a fee, which varies according to the category of students. General/OBC-NCL/EWS candidates need to pay INR 10,000. Candidates belonging to SC/ST/PwD need to pay INR 5,000.

Step 8: Further Admission Rounds

If there are still unoccupied seats, rounds for seat allocation will be held until all are filled, following the same procedure.
Candidates in the ”Accept with Upgrade” status will have the chance to be upgraded in subsequent rounds.

Step 9: Seat Withdrawal

Before the last round, candidates have the right to take back their agreement with a partial refund (INR 1,000 will be deducted).

Step 9: Reporting and Enrollment

Once the seat allocation is final, candidates are required to report to IIT Bhubaneswar with the originals of their documents as stated in the offer letter.

IIT Bhubaneswar ITEP Eligibility Criteria

Entry to the program is via the National Common Entrance Test (NCET-2025), which is a written test on domain-specific subjects, and candidates must have studied the relevant subjects in class 12.
The age restrictions are different for the various categories, the earliest birth date allowed for General/EWS candidates being October 1, 2006, and the other categories being relaxed accordingly.
The program is open to the following category-wise minimum aggregate marks for the 10+2 examination: 60% for General and EWS, 55% for OBC, and 50% for SC/ST/PwD.
The program welcomes students from the streams of Humanities, Science, and Commerce after completing 10+2 with the abovementioned category-wise marks.

Category	Requirements
General Eligibility	- 10+2 aggregate: UR/EWS 60%, OBC 55%, SC/ST/PWD 50% - Appeared in all 7 subjects in NCET-2025 - Birth date: UR/EWS ≥ Oct 1, 2005; OBC ≥ Oct 1, 2002; SC/ST/PWD ≥ Oct 1, 2000
Physics (Major)	- NCET-2025: Physics as domain subject - 10+2: Physics + Mathematics - 10+2 Physics marks: UR/EWS 60%, OBC 55%, SC/ST/PWD 50%
Physics (Minor)	- 10+2: Physics + Mathematics
Chemistry (Major)	- NCET-2025: Chemistry as domain subject - 10+2: Chemistry + Mathematics - 10+2 Chemistry marks: UR/EWS 60%, OBC 55%, SC/ST/PWD 50%
Chemistry (Minor)	- 10+2: Chemistry + Mathematics
Mathematics (Major)	- NCET-2025: Mathematics/Applied Mathematics as domain subject - 10+2: Mathematics - 10+2 Mathematics marks: UR/EWS 60%, OBC 55%, SC/ST/PWD 50%
Mathematics (Minor)	- 10+2: Mathematics
Economics (Major)	- NCET-2025: Mathematics/Applied Mathematics as domain subject - 10+2: Mathematics - 10+2 Mathematics marks: UR/EWS 60%, OBC 55%, SC/ST/PWD 50%
Economics (Minor)	- 10+2: Mathematics

IIT Bhubaneshwar M.Tech and M.Sc. Entrance Exams Accepted

IIT Bhubaneswar Admission‍‌‍‍‌‍‌‍‍‌ to postgraduate courses is determined through nationwide entrance examinations followed by counselling. To be allowed at M.Tech, candidates have to pass the GATE exam, with registrations occurring from late August to mid-October and the exams being held in February. The minimum requirement is that the candidates should have secured at least 60% of the marks or a CGPA of 6.5 in B.Tech or its equivalent, while those belonging to the reserved categories can avail 5% relaxation in the marks.

Indian Institute of Technology Bhubaneswar Admission to M.Sc. is decided through JAM only. The applicants should hold a relevant bachelor's degree with at least 60% of the marks and also be qualified in the JAM exam, the registration for which will be in September-October, and the exam in February. The Integrated Teacher Education Program (ITEP) has age, academic background, and domain-specific NCET as its eligibility criteria. This admission system guarantees merit-based selection and transparency at IIT Bhubaneswar's PG ‍‌‍‍‌‍‌‍‍‌departments.

Entrance Exam	Important Date
GATE	Registration Date- 25 Aug- 13 Oct 2025 Exam Date- 7,8,14,15 Feb 2026 Result Date- 19 March 2026
IIT JAM	Registration Date- 5 Sep- 20 Oct 2025 Exam Date- 15 Feb 2026 Result Date- 20 March 2026
NCET	Registration Date- Feb-March 2026* Exam Date- Last April 2026* Result Date- June 2026*

IIT Bhubaneswar M.Tech Admissions Process

Step 1: Check‍‌‍‍‌‍‌‍‍‌ Eligibility

One should either have a valid GATE score or be an IIT graduate with a CGPA ≥ 8.0 (on a 10-point scale).
One should have at least 60% of the marks or 6.5 CGPA in the qualifying degree (B.Tech/B.E. or equivalent).

Step 2: Register on COAP (Common Offer Acceptance Portal)

All the candidates who have qualified in GATE need to be registered at COAP in order to take part in admission offers and counselling.

Step 3: Apply Online at IIT Bhubaneswar

Upon registering at COAP, GATE-qualified candidates will be able to submit an online application for the M.Tech program at IIT Bhubaneswar within the specified dates.
Make sure that all the details you have filled in are correct because you will not be allowed to make changes later.

Step 4: Shortlisting and Selection

Shortlisting is done mostly by looking at the GATE scores.
If there is a tie in the GATE score, preference is first given to the one with higher 12th-grade marks. If that is also the same, then 10th-grade marks, and if even that is the same, then by seniority of age are used to decide ranks.
Sponsored candidates must have been working for at least 3 years in their sponsoring organisation, and they should clear the written test and interview rounds.

Step 5: Document Submission

Present your documents such as GATE scorecard, academic certificates, category certificates (if applicable), and No Objection Certificate (for sponsored candidates), etc., as required.

Step 6: Pay the Application Fee

For General and OBC Category- INR 300
For SC/ST/PwD category- INR 150
Female candidates are not required to pay the fee.

Step 7: Assistantship and Financial Support

A scholarship can be availed by a regular M.Tech student (non-sponsored) for a maximum period of 24 months.
Academic-related partial grant can be used for conference and workshop purposes.

Step 8: Final Admission Offer

Candidates are required to confirm their admission offer both through COAP and IIT Bhubaneswar's portal before the ‍‌‍‍‌‍‌‍‍‌deadline.

IIT Bhubaneswar GATE Cutoffs 2025

The‍‌‍‍‌‍‌‍‍‌ GATE cutoff ranks of IIT Bhubaneswar for 2025 are different for each faculty and category, which indicates how competitive each program is. In the case of candidates of the general category, the best programs like Computer Science and Engineering have cutoffs at about 620-680 marks, while other branches, such as Signal Processing, Power System Engineering, and Structural Engineering, have cutoffs varying from 400 to 500 marks.

As for the reserved categories, the cutoffs are lower compared to those of the general category, the OBC cutoffs being a little below the general category, and the SC and ST categories having further relaxed cutoffs. These cutoffs show the minimum GATE scores necessary for admission to different M.Tech programs; thus, only those candidates who have qualified through a rigorous and transparent selection process are given admission. Candidates from the reserved category are also given relaxation in the marks ‍‌‍‍‌‍‌‍‍‌required.

School	Discipline	General	PwD	OBC (NCL)	SC	ST	EWS
School Of Earth, Ocean, and Climate Sciences	Climate Science & Technology	499	-	343	298	343	346
	Signal Processing and Communication Engineering	420	-	362	283	259	488
	Power System Engineering	421	-	442	334	284	413
	Computer Science and Engineering	622	-	597	381	436	595
	Power Electronics and Drives	415	-	468	342	315	405
	Semiconductor Technology & Chip Design	463	-	444	370	323	448
	Artificial Intelligence	597	-	579	418	331	556
	Structural Engineering	516	-	548	359	366	469
	Transportation Engineering	453	-	454	408	325	476
	Environmental Engineering	412	246	443	299	272	393
	Water Resources Engineering	359	-	325	325	NS	NA
	Geotechnical Engineering	511	-	434	303	295	NS
	Mechanical Systems Design	375	-	449	265	324	362
	Thermal Science and Engineering	400	-	435	236	NA	445
	Manufacturing Engineering	420	-	349	286	283	418
	Robotics and Artificial Intelligence	407	-	387	339	248	NA
School Of Minerals, Metallurgical & Materials Engineering	Metallurgical and Materials Engineering	378	-	375	258	NA	358

IIT Bhubaneswar M.Tech Streams Offered & Seat Matrix

IIT‍‌‍‍‌‍‌‍‍‌ Bhubaneswar has a variety of courses under the M.Tech programs with a total intake of 296 seats, which are distributed over different branches of engineering and technology. Among these are the departments of Climate Science & Technology, Structural, Transportation, Environmental, Water Resources, and Geotechnical Engineering, in addition to a bunch of highly specialized branches like Signal Processing & Communication, Power System Engineering, Computer Science, Power Electronics & Drives, Integrated Circuits & VLSI Systems, Metallurgical and Materials Engineering, Mechanical Systems Design, Thermal Science, and Manufacturing Engineering. Every‍‌‍‍‌‍‌‍‍‌ program allows students to enroll from multiple categories, such as General, EWS, OBC, SC, ST, and PWD. IIT Bhubaneswar Fees for the M.Tech course vary by category.

Program	Total Intakes	Gen	EWS	OBC	SC	ST	PWD
Climate Science & Technology	22	9	2	6	3	2	-
Structural Engineering	15	6	2	4	2	1	-
Transportation Engineering	12	5	1	3	2	1	-
Environmental Engineering	15	6	2	4	2	1	-
Water Resources Engineering	15	6	2	4	2	1	-
Geotechnical Engineering	15	6	2	4	2	1	-
*Signal Processing & Communication Engineering	*24	*10	2	*7	*4	*1	-
*Power System Engineering	*22	9	2	6	*4	*1	-
*Computer Science and Engineering	*23	9	2	6	*4	2	-
*Power Electronics and Drives	*23	9	2	6	*4	2	-
Integrated Circuits & VLSI Systems	22	9	2	6	3	2	-
Metallurgical and Materials Engineering	22	9	2	6	3	2	-
Mechanical Systems Design	22	9	2	6	3	2	-
Thermal Science and Engineering	22	9	2	6	3	2	-
Manufacturing Engineering	22	9	2	6	3	2	-

Notes:

A 5% relaxation in marks in the qualifying degree examination is granted to SC, ST, and PwD candidates. This applies to both regular and sponsored candidates.
The seat matrix reflects the updated sanctioned strength after implementing a 10% reservation for the Economically Weaker Section (EWS) category and the addition of VLSI Systems in the School of Electrical Sciences.
Seats marked with an asterisk (*) indicate changes in these categories and disciplines.
Category-wise seat numbers may be rotated across different disciplines every year.
There are no specific seats allocated to the PwD students.

IIT Bhubaneswar M.Sc. Admissions Process

Step 1: Appear‍‌‍‍‌‍‌‍‍‌ and Qualify in JAM Exam

Candidates need to register for and appear. The JAM test is held at the national level, and the test scores are considered for admission into the M.Sc. courses in the various institutes.

Step 2: Application Submission

The qualified JAM candidates can submit their application through official website.

Step 3: Merit List Creation

The merit list shall be drawn based on the candidates' JAM scores for the allotted seats.

Step 4: Counselling and Seat Allotment

On the JOAPS portal, candidates sign in for counselling. Depending on merit and preferences, they get the offer of seats.

Step 5: Admission Offer Decision

First, candidates are required to select from three possible options: Accept and Freeze (accept the seat and do not allow any further upgrade), Accept with Upgrade (confirm the seat but still be eligible to upgrade), or Reject and Quit (decline the seat and leave the admission process).

Step 6: Seat Booking Fee Payment

Candidates who accept a seat (either Freeze or Upgrade) will be required to make the seat booking fee payment ( INR 15,000 for General/OBC/EWS; INR 7,500 for SC/ST/PwD).

Step 7: Document Verification and Admission Confirmation

Candidates are required to physically present themselves at the institute that is giving them admission, along with the necessary original documents for verification, and pay the remaining fee of the institute.

Step 8: Further Rounds

In case of seats being vacant, additional admission rounds take place, involving the same steps until all vacancies are filled.

Step 9: Offer Letter Download

On the completion of the final round, the admission letters are made available on the portal for printing by the admitted ‍‌‍‍‌‍‌‍‍‌candidates.

IIT Bhubaneshwar MSc Cutoff 2025

Candidates who want to get admission in the M.Sc. program at IIT Bhubaneshwar, need to have valid cutoff marks in IIT JAM exam. Below are the 2025 cutoff marks for all categories such as general, OBC, SC and ST and EWS. The two year M.Sc program offered under Joind M.Sc.-Ph.D program

Round	Course Name	Paper Name	GEN Open/Close		GEN-EWS Open/Close		OBC-NCL Open/Close		SC Open/Close		ST Open/Close
Round 1	Joint M.Sc.Ph.D. in Chemistry (CY)	CY	121	413	477	486	580	690	1325	1582	2772	3305
Round 1	Joint M.Sc.Ph.D. in Mathematics (MA)	MA	356	469	567	717	479	669	1040	1295	3426	3426
Round 1	Joint M.Sc.Ph.D. in Physics (PH)	PH	253	412	791	791	594	837	1618	1738	3983	4277
Round 1	Joint M.Sc.Ph.D. in Geology (GG)	GG	24	127	147	162	159	188	295	416	519	520
Round 1	Joint M.Sc.Ph.D. in Atmosphere & Ocean Sciences (GG)	GG	136	186	216	216	233	256	484	495	--	--
Round 1	Joint M.Sc.Ph.D. in Atmosphere & Ocean Sciences (MA)	MA	582	589	--	--	712	712	1841	1841	--	--
Round 1	Joint M.Sc.Ph.D. in Atmosphere & Ocean Sciences (PH)	PH	411	532	1117	1117	849	1057	1518	1518	5146	5146
Round 2	Joint M.Sc.Ph.D. in Chemistry (CY)	CY	121	466	477	490	580	786	1325	1582	2772	3305
Round 2	Joint M.Sc.Ph.D. in Mathematics (MA)	MA	356	494	770	816	540	697	1040	1295	3426	3426
Round 2	Joint M.Sc.Ph.D. in Physics (PH)	PH	356	466	791	809	594	844	1656	1819	3983	4277
Round 2	Joint M.Sc.Ph.D. in Geology (GG)	GG	24	127	147	162	159	189	295	416	519	520
Round 2	Joint M.Sc.Ph.D. in Atmosphere & Ocean Sciences (GG)	GG	136	186	216	216	233	285	484	495	615	615
Round 2	Joint M.Sc.Ph.D. in Atmosphere & Ocean Sciences (MA)	MA	582	589	--	--	798	798	1841	1841	--	--
Round 2	Joint M.Sc.Ph.D. in Atmosphere & Ocean Sciences (PH)	PH	532	736	1117	1117	849	1181	1518	1518	5146	5146

IIT Bhubaneshwar M.Tech and M.Sc. Eligibility Criteria

To get admission in PG courses at IIT Bhubaneshwar, candidates must have an undergraduate or equivalent degree (not applicable for all) is needed for the application. Admission to PG courses like M.Tech, MSc (under joint M.Sc-Ph.D, M.S-R, etc requires students to have a specific entrance exam score, while for the blended M.Tech course, no entrance exam is required. Some courses also demand a specific UG degree for admission, along with a specific subject in the GATE exam. Candidates falling under the reservation quota will get some relaxation in terms of marks or cutoff, while this may vary per course.

Eligibility Criteria for M.Tech Program

The following table contains the course-wise eligibility criteria for admission. This data may vary; candidates are advised to check out the official website while applying for admission.

M.Tech. Programme	Eligibility / Previous Degree	Required GATE Streams (Code)
School of Earth, Ocean and Climate Sciences (SEOCS)
Climate Science & Technology	M.Sc. or equivalent (Atmospheric Science/Marine Science/Oceanography/Meteorology/Physics/Chemistry/Mathematics), 60% or 6.5 CGPA. Mathematics/Physics at B.Sc. level essential.	Aerospace Engineering [AE], Civil Engineering [CE], Computer Science & IT [CS], Chemistry [CY], Data Science & AI [DA], Electronics & Comm. Eng. [EC], Environmental Science & Eng. [ES], Geomatics Eng. [GE], Instrumentation Eng. [IN], Mathematics [MA], Mechanical Engineering [ME], Naval Architecture & Marine Eng. [NM], Physics [PH], Statistics [ST], Engineering Sciences [XE]
Climate Science & Technology	B.Tech./B.E. in Civil Engineering / Applied Mechanics / Aeronautical Engineering / Mechanical Engineering / Computer Science or equivalent, 60% or 6.5 CGPA	Same as above + Civil Eng./Applied Mechanics/Aeronautical Eng./Mechanical Eng./CS & Eng.
School of Infrastructure (SIF)
Structural Engineering	B.Tech./B.E. in Civil Engineering, 60% or 6.5 CGPA	Civil Engineering [CE]
Transportation Engineering	B.Tech./B.E. in Civil / Infrastructure Engineering / Architecture / Planning, 60% or 6.5 CGPA	Civil Engineering [CE]
Environmental Engineering	B.Tech./B.E. in Civil / Environmental / Chemical / Biochemical Engineering, 60% or 6.5 CGPA	Civil Engineering [CE]
Water Resources Engineering	B.Tech./B.E. in Civil / Agricultural Engineering, 60% or 6.5 CGPA	Civil Engineering [CE]
Geotechnical Engineering	B.Tech./B.E. in Civil Engineering, 60% or 6.5 CGPA	Civil Engineering [CE]
School of Electrical and Computer Sciences (SECS)
Signal Processing & Communication Engineering	B.Tech./B.E. in Electrical, Electronics, Electronics & Comm. Eng., 60% or 6.5 CGPA	Electronics & Comm. Eng. [EC], Electrical Engineering [EE]
Power System Engineering	B.Tech./B.E. in Electrical Engineering or equivalent, 60% or 6.5 CGPA	Electrical Engineering [EE]
Computer Science and Engineering	B.Tech./B.E. in CS & Engineering / IT, 60% or 6.5 CGPA	Computer Science & IT [CS], Data Science & AI [DA]
Power Electronics and Drives	B.Tech./B.E. in Electrical Engineering or equivalent, 60% or 6.5 CGPA	Electrical Engineering [EE]
Semiconductor Technology & Chip Design	B.Tech./B.E. in Electrical / Electronics / Electronics & Comm. Eng., 60% or 6.5 CGPA	Electronics & Comm. Eng. [EC]
Artificial Intelligence	B.Tech./B.E. in Computer Science / IT / AI and Data Science / Electronics & Comm. Eng., 60% or 6.5 CGPA	Computer Science & IT [CS], Data Science & AI [DA]
School of Minerals, Metallurgical and Materials Engineering (SMMME)
Metallurgical and Materials Engineering	B.Tech./B.E. in Metallurgy or equivalent (Biomedical Eng., Biotechnology, Chemical Eng., Chemistry, Electronics & Comm. Eng., Mechanical Eng., Mining Eng., Physics, Production & Industrial Eng., Engineering Sciences, Data Science & AI, Polymer Science & Eng., Electrical Eng.), 60% or 6.5 CGPA	Metallurgy [MT], Biomedical Eng. [BM], Biotechnology [BT], Chemical Eng. [CH], Chemistry [CY], Electronics & Comm. Eng. [EC], Mechanical Eng. [ME], Mining Eng. [MN], Physics [PH], Production & Industrial Eng. [PI], Engineering Sciences [XE], Data Science & AI [DA], Polymer Science & Eng. [XE-F], Electrical Eng. [EE]
	M.Sc. in Materials Science, 60% or 6.5 CGPA	Metallurgy [MT], Mathematics desirable at B.Sc. level
School of Mechanical Sciences (SMS)
Mechanical Systems Design	B.Tech./B.E. in Mechanical Engineering or equivalent, 60% or 6.5 CGPA	Mechanical Engineering [ME]
Thermal Science and Engineering	B.Tech./B.E. in Mechanical Engineering or equivalent, 60% or 6.5 CGPA	Mechanical Engineering [ME]
Manufacturing Engineering	B.Tech./B.E. in Mechanical / Manufacturing / Industrial & Production Eng., 60% or 6.5 CGPA	Mechanical Engineering [ME], Production & Industrial Engineering [PI]
Robotics and Artificial Intelligence	B.Tech./B.E. in Mechanical / Manufacturing / Industrial & Production Engineering / Mechatronics / Robotics or equivalent, 60% or 6.5 CGPA	Mechanical Engineering [ME], Production & Industrial Engineering [PI]

Eligibility Criteria for MSc/M.Tech (Blend)/ MS-Research

The criteria for admission to the MS/MSc programs differ: the MS (by Research) program necessitates an undergraduate engineering/science basis, as well as research ability demonstrated by passing national or institute exams. The MSc program is open to applicants who have completed their bachelor's in science with high scores through competitive national tests. M.Tech (Blended Mode) takes in B.Tech/BE graduates (entrance exam not required), aimed at working professionals who are academically prepared and have the necessary experience.

Course	Qualifying Degree	Eligibility Criteria
M.Sc.	B.Sc./B.E./B.Tech or equivalent in related field	- 60% or 6.5 CGPA in qualifying degree and 10th/12th (55% OBC, 50% SC/ST) - Must have appeared and qualified in JAM 2025 (admission purely on JAM merit).
M.Tech (Blended Mode)	Relevant B.E./B.Tech or equivalent degree in appropriate/related field (as per institute norms)*	- GATE not required; - Other detailed criteria (minimum marks, specific branches) depend on the institute’s official notification.*
MS Research	Category-1: Institute Fellowship (Specialisations: Mechanical, Civil, Electrical, Electronics & Comm., Computer Science, Metallurgical & Materials, Climate Sciences)
MS Research	B.Tech./B.E. or equivalent	Min 60% marks or 6.5 CGPA (10-point scale); GATE qualified in the appropriate discipline.
MS Research	M.Sc. or equivalent	Min 60% marks or 6.5 CGPA (10-point scale) + min 60% or 6.5 CGPA in B.Sc./B.A./B.Com. GATE or CSIR-UGC NET (LS) qualified.
MS Research	B.Tech. from CFTIs	CGPA ≥8.0 (10-point scale); no GATE. CFTIs
MS Research	General Academic	Min 60% marks in all exams; single 5% relaxation in 10th or 12th. SC/ST/PwD: additional up to 5%.
MS Research	Category-2: Project Staff (IIT Bhubaneswar)
MS Research	Project Staff	Min qualifications as Category-1; working as JRF/SRF/equivalent. in an Institute project; GATE/CSIR-UGC NET (LS) qualified.
MS Research	Category-3: Institute Staff/Sponsored (External)
MS Research	Permanent Institute/Sponsored Staff	B.Tech./B.E. or equiv. with ≥70% or 7.5 CGPA (no GATE/CSIR-UGC NET). OR ≥60% or 6.5 CGPA + GATE/CSIR-UGC NET (LS).
MS Research	Experience & Employment	Min 3 years exp.; employed in industry/org. at the application.
MS Research	Documentation	NOC from employer in the given format.

IIT Bhubaneshwar Entrance Examination for PhD Admissions

IIT Bhubaneswar admission norms for PhD programs are contingent upon the candidate's academic qualifications and entrance examination results. The PhD applicants are required to have a Master's degree with a minimum of 60% of the total marks for Engineering/Technology and 55% for Humanities or a Bachelor's degree with outstanding academic records. Such candidates need to qualify in GATE, CSIR-UGC NET, JAM, or JEST.

However, those who are sponsored with work experience and NOCs can apply without these qualifications. MS by Research aspirants should hold a Master's degree in the relevant area(s) of study with a minimum of 60% marks or 6.5 CGPA and possess a valid GATE or CSIR-UGC NET certification. Candidates belonging to reserved categories will get relaxations. The admission process consists of a written test and an interview, through which the candidates are assessed at different ‍‌‍‍‌‍‌‍‍‌levels.

Here's the table with full forms expanded:

School/Centre	GATE Disciplines	UGC-CSIR-NET Disciplines
SES (School of Electrical Sciences)	Electrical Engineering (EE), Instrumentation (IN)	-
CSE (Computer Science and Engineering)	Computer Science and Information Technology (CS), Data Science and Artificial Intelligence (DA)	Computer Science and Applications (Code-87)
ECE (Electronics & Communication Engineering)	Electronics and Communication Engineering (EC), Instrumentation Engineering (IN), Electrical Engineering (EE), Computer Science and Information Technology (CS)	Electronic Science (Code-88), Computer Science and Applications (Code-87)
SIF (School of Infrastructure)	Civil Engineering (CE)	-
SMS (School of Mechanical Sciences)	Mechanical Engineering (ME), Production Engineering (PI), Aerospace Engineering (AE), Chemical Engineering (CH), Biotechnology (BT), Biomedical Engineering (BM), Engineering Sciences (XE)	-
SMMME (School of Minerals, Metallurgical & Materials Engineering)	Biomedical Engineering (BM), Biotechnology (BT), Chemical Engineering (CH), Chemistry (CY), Electronics and Communication Engineering (EC), Mechanical Engineering (ME), Mining Engineering (MN), Metallurgical Engineering (MT), Physics (PH), Production and Industrial Engineering (PI), Engineering Sciences (XE), Data Science and Artificial Intelligence (DA), Civil Engineering (CE), Environmental Science & Engineering (ES), Polymer Science and Engineering (XE-F), Geology and Geophysics (GG), Electrical Engineering (EE)	-
SHSS&M (School of Humanities, Social Sciences & Management)	-	Economics (Code-01), English (Code-30)/Linguistics (Code-31), Philosophy (Code-03), Psychology (Code-04)
SBS (School of Basic Sciences)	Physics (PH), Chemistry (CY), Mathematics (MA), Statistics (ST), Computer Science and Engineering (CS), Biotechnology (BT), Life Sciences (XL)	Physics, Chemistry, Mathematics/Statistics/Computer Science and Engineering, Biotechnology/Life Sciences
SEOCS (School of Earth, Ocean & Climate Sciences)	Engineering Sciences-Atmospheric and Oceanic Sciences [XE (XE-H)] (preferred)	Earth, Atmospheric, Ocean and Planetary Sciences (preferred)
Geology/Earth Sciences	Geology and Geophysics (GG), Geomatics Engineering (GE), Environmental Science and Engineering (ES)	Earth, Atmospheric, Ocean and Planetary Sciences, Environmental Sciences
AHRC (AI and HPC Research Centre)	Data Science and Artificial Intelligence (DA), Computer Science and Information Technology (CS), Electronics and Communications Engineering (EC)	-

IIT Bhubaneshwar PhD Eligibility Criteria

IIT Bhubaneshwar PhD eligibility requirements differ from the categories. For admission, it has 5 categories, such as institute scholar, sponsored scholar, joint MSc PhD student, staff category, and the last category is Ph.D working professional. For the engineering schools under the PhD admission, the criteria are different, such as the required degree, minimum marks or CGPA. Below is the detailed category wise eligibility criteria for the PhD admission:

Category 1: For Institute Scholar

All Engineering Schools (SECS, SIF, SMS, SMM&ME)

1. Candidates must require to hold M. Tech. or ME or any equivalent qualification with at least 60% marks of 6.5 CGPA on the scale of 10. B. Tech or BE or equivalent degree in any relevant discipline is also considered for admission with min 70% average marks (7.5 CGPA). If a candidate is applying with the second category, which is B.Tech., one must appear for the GATE examination and obtain a valid and accepted score.

2. Candidates must have at least 60% marks or 6.5 CGPA (10-point scale) in all exams from Class 10 onwards. A single relaxation of up to 5% is permitted in secondary/higher secondary or equivalent exams.

School of Humanities, Social Sciences and Management (SHSS&M)

1. Candidates must possess a Master’s degree in a relevant Humanities or Social Sciences discipline, achieving a minimum of 55% marks or 6.0 CGPA on a 10-point scale.

2. They are also required to maintain at least 55% marks or 6.0 CGPA in all examinations from Class 10 onwards, with a single relaxation of up to 5% permitted in secondary, higher secondary, bachelor’s, or equivalent levels.

3. Additionally, qualification in GATE or CSIR-UGC NET (LS) in the relevant discipline is mandatory for eligibility.

School of Basic Sciences (SBS)

1. Master’s or equivalent in a relevant discipline with a minimum of 60% marks or 6.5 CGPA is the main criterion for admission.

2. Minimum 60% marks or 6.5 CGPA on a 10-point scale requirement is set for admission from class 10 onwards. Candidates who have a secondary, higher secondary, bachelor’s degree, or equivalent are given up to 5% mark relaxation.

3. Minimum 60% marks or 6.5 CGPA from Class 10 onwards (single relaxation up to 5%).

4. Candidate must qualify in GATE, CSIR-UGC NET (LS), JAM, or JEST in the relevant discipline.

School of Earth, Ocean and Climate Sciences (SEOCS)

1. Candidates must hold a Master’s degree or equivalent in the relevant discipline with a minimum of 60% marks or 6.5 CGPA on a 10-point scale, or a B.Tech./BE or equivalent degree with at least 70% marks or 7.5 CGPA.

2. If anyone is holding a secondary or higher secondary degree, they can be given up to 5% relaxation according to the courses and institute norms.

3. Additionally, a valid qualification in GATE, CSIR-UGC NET (LS), JAM, or JEST in the relevant discipline is mandatory for eligibility.

Note for CFTIs Students: CFTI students admitted via JEE (pursuing B.Tech, BE, Integrated M.Tech, M.Sc or 4-year programs) with ≥7 semesters completed and CGPA ≥8.0 (maintained at graduation), or M.Sc. graduates from IITs or IISc with CGPA ≥8.0, are eligible without needing GATE or CSIR-UGC NET (LS). They also need to qualify for Category-1 assistantship and must meet other Category-1 educational requirements.

Category 2:For Sponsored

Sponsored by External Organisation

Minimum 3 years continuous service in government, R&D, industry, autonomous bodies, or universities.
No GATE/CSIR-UGC NET requirement.
Must meet Category 1 (Non-sponsored) academic qualifications.
A sponsorship certificate is mandatory in the prescribed format.
Financial Support: None from the Institute.

Sponsored GoI Doctoral Fellowship

Must hold CSIR-UGC NET (JRF) or equivalent Government of India doctoral fellowship.
Meets Category 1 academic qualifications.
GATE not required.
Financial Support: Fellowship provided by the GoI body.

IIT Bhubaneswar Sponsored Project

Currently working as a JRF/JRF in an IIT Bhubaneswar-sponsored project with a fellowship equivalent to an Institute PhD scholar level considered eligible for applying under this category.
The project must have at least 2 years remaining (relaxable to 6 months).
Candidates receive assistantship from the funds allocated under the personnel/manpower budget head of the project (hereafter referred to as the Project Fund), with the fellowship amount being at least equivalent to that provided to Institute Ph.D. scholars.
Additionally, the remaining period of the Project Fund within a single project, along with the remaining tenure of that same project, must be at least 2 years from the date of enrollment in the Ph.D. program during the Spring Semester as per the academic calendar (if selected).
This 2-year duration requirement for the project can be relaxed by up to 6 months upon the recommendation of the Principal Investigator (PI) and the Head.

Sponsored under AHRC

Candidates must hold an M.Tech./ME or equivalent degree in Artificial Intelligence, Data Science, Computer Science, Electronics and Communication Engineering, or in any Engineering discipline, with a minimum of 60% marks or 6.5 CGPA on a 10-point scale, and be GATE qualified in Data Science and Artificial Intelligence (DA), Computer Science and Information Technology (CS), or Electronics and Communications Engineering (ECE); alternatively, a B.Tech./BE or equivalent in specified engineering fields (including AI, Data Science, CS, Electrical, Electronics, Communication, Mechanical, Civil, Biomedical, Genetics, Agricultural, Environmental) with at least 70% marks or 7.5 CGPA, or an M.Sc. or equivalent in Mathematics, Biology, Genetics, Psychology with minimum 60% marks or 6.5 CGPA, both requiring the same GATE qualifications.
They are also required to maintain at least 60% marks (6.5 CGPA) in all examinations from Class 10 onwards. Relaxation of up to 5% permitted in secondary or higher secondary or equivalent exams.
Selected students through AHRC will be affiliated to the respective School/Department based on their allotted main supervisor, and they will receive a fellowship equivalent to that of Category-1 Institute Ph.D. scholars.

Category 3: Joint M.Sc.-Ph.D. (Autumn Admission)

This program targets bright M.Sc. students at IIT Bhubaneswar who have completed their third semester with a CGPA ≥ 8.5, automatically shortlisting them for the Ph.D. selection test in the following Autumn semester.
Interested students must submit a declaration to join Ph.D. within two weeks of third-semester results; otherwise, they won't be considered, and tests align with regular Autumn Ph.D. admissions.
A discipline-wise cap of 10% of sanctioned strength (rounded up) applies to selections.
IIT JAM marks are also required as per the department.

Note: Candidates will get enrolled in the autumn semester if they get selected after the tests under category 3.

Category 4: Institute Staff Category (IIT Bhubaneswar)

Non-Teaching Staff (permanent, technical or non-technical) may join the Ph.D. program with prior No Objection Certificate (NOC) from the Competent Authority.
They must meet Category-1 eligibility norms, including minimum marks/CGPA in the qualifying exam as prescribed therein.
GATE/UGC-NET/CSIR-NET (LC) qualification is not required.

Category 5: Ph.D. Programme for Working Professionals

Candidates with at least 3 years of relevant work experience (across multiple organisations) in GoI departments/ministries, government organisations, industrial R&D, autonomous bodies, public undertakings, universities/colleges, or established industries/start-ups need not be GATE/CSIR-UGC NET (LS) qualified.
They must meet Category-1 minimum qualifications for Ph.D. admission, with relaxed residential requirements for coursework.

IIT Bhubaneswar PhD Admissions Process

Step 1: Academic Eligibility Criteria

In most cases, applicants are required to hold a Master’s degree or M.Tech. degree with a minimum of 60% marks or 6.5 CGPA (the requirement varies from one school to another).
Most of the categories require one to have a qualification such as GATE or CSIR-UGC NET, or its equivalent, except for a few categories of sponsored and staff.
Moreover, the SC/ST/PwD candidates are allowed certain specific relaxations (up to 5%).

Step 2: Apply Online

Candidates' online applications should be submitted along with detailed academic and experience documents before the last date (normally from the middle of March to the middle of April).
Applicants should upload the scanned copies of all their certificate documents. There is no need for the hard copies.

Step 3: Shortlisting

Schools, based on academic merit and meeting of the eligibility criteria, shortlist candidates.
Besides that, schools may decide to impose such additional criteria as discipline/branch and minimum marks.

Step 4: Selection Process

The decision to call an interview and/or written test is at the discretion of individual schools, and only shortlisted candidates are so notified.
Assessment of performance in a written test (only if there) will be 40% and that in an interview will be 60%, while where no written test is held, only 100% of the interview shall be taken into account.
The ultimate selection depends on the aggregate score and the cut-off levels set by schools.

Step 5: Document Verification and NOC

Candidates belonging to the staff, sponsored, and working professional categories should bring with them, at the time of admission, employer-issued No Objection Certificates (NOC) in the formats specified.

Step 6: Pay Application Fee